Don't Miss

Reflective Insulation

Benner Reflective Insulation & Duct Wrap when installed its  primarily function to reduce heat gain and reduce cooling costs. The barriers consist of a highly reflective material that reflects radiant heat rather than absorbing it.

116

777Dude_With_Magnifying_Glass

 View Handbook

 Turning Empty Air Space into Thermal Resistance

 Adequate Attic Venting

 Attic Ventilation Performance

EVALUATION OF PLACEMENT OF RADIANT BARRIERS AND THEIR EFFECTIVENESS

Metal Buildings and Condensation

Reflective Insulation and Radiant Barriers and the Energy Crisis

Reflective Insulation 101

EFFECTS OF REFLECTIVE RADIANT BARRIER ON HEAT LOSS

What is “Radiant Barrier Paint”?

Radiant Barriers: Performance Revealed

Radiant barrier temperature drop

RADIANT BARRIERS: PROVEN TO WORK

Reflective insulation benefits

Reflective Technology-It’s About Saving Energy

Technical Bulletins

HOW BENNER REFLECTIVE INSULATION WORKS

Heat travels from a warm area to a cool area by a combination of conduction, convection, and radiation. Heat flows by conduction from a hotter location within a material or assembly to a colder location, like the way a spoon placed in a hot cup of coffee conducts heat through its handle to your hand. Heat transfer by convection occurs when a liquid or gas — air, for example — is heated, becomes less dense, and rises. As the liquid or gas cools, it becomes denser and falls. Radiant heat travels in a straight line away from any surface and heats anything solid that absorbs its energy.

Most common insulation materials work by slowing conductive heat flow and convective heat flow. Radiant barriers and reflective insulation systems work by reducing radiant heat gain. Dust accumulation on the reflective surface will reduce its reflective capability. The radiant barrier should be installed in a manner to minimize dust accumulation on the reflective surface.

When the sun heats a roof, it’s primarily the sun’s radiant energy that makes the roof hot. Much of this heat travels by conduction through the roofing materials to the attic side of the roof. The hot roof material then radiates its gained heat energy onto the cooler attic surfaces, including the air ducts and the attic floor. A radiant barrier reduces the radiant heat transfer from the underside of the roof to the other surfaces in the attic.

A radiant barrier works best when it is perpendicular to the radiant energy striking it. Also, the greater the temperature difference between the sides of the radiant barrier material, the greater the benefits a radiant barrier can offer.

311

Benner Radiant Barrier – Reflective Insulation

Benner Reflective Insulation must always be installed in the presence of an air space.

Examples of Radiant Barrier Applications.

Installation of Reflective Insulation Systems Metal Buildings.

Metal Buildings (NEW).

New Construction Roof.

Thermal breaks are important in providing maximum thermal performance of a reflective material.

Cross Sectional View for New Construction:

Reflective insulation installed over purlins and girts with thermal spacer blocks.

New Construction Roof.

With and Without Thermal Breaks.

Metal Buildings (Ceilings)

New or Existing

Retrofit

Vapor Retarder

Metal Buildings (ceilings)
New or Existings

Examples of Reflective Insulation Applications.

R Values Apply.

Wall Applications.

Duct Applications.

New Construction Walls.

Thermal Breaks – Be Sure to Install Correctly.

Post Frame – Wall and ceiling.

New Construction Walls

Hybrid Strategies.

Enclose the space below an R-19 batt insulation to form a reflective air space.

Install Reflective insulation above the purlins to produce a reflective air space between the mass insulation and the roof panels.

Both strategies increase the thermal resistance between the purlins and add a continuous layer of insulation.

New Construction Walls

In Combination with Mass Insulation.

Roof Applications

Reminder:

Enclosed reflective air spaces can be used to form hybrid metal building insulation systems.

Continuous added R value can be achieved.

Hybrid systems provide a way to satisfy new thermal resistance requirements for metal buildings.

Phone Numbers:
(561)510-4200 (787)962-3419

Florida Office:
278 Tresana Blvd. #138 Jupiter, FL 33478

/ BENNERUSA.COM WEBSITE TAGS /
Aluminum Ceiling | Mineral Fiber Ceiling | Suspension System | Vinyl Flooring | Vinyl Floor | Reflective Insulation | Bathroom Partitions | 3D Walls | Acoustical Ceiling | Drop Ceiling | false ceiling | Main Tee | Cross Tee | Wall Angle | Fastening | Wood floor | marble floor | carpet floor | Insulation | Wood Ceilings | Office ceiling | open cell ceiling | Building Materials | Building materials supplier | against mold | Aluminun Ceiling Color Chart | Aluminun Ceiling Wood Color Chart | free on-line education | efficiency | greenbuild | reciclied materials | products catalog | clean room floor | clean room ceilings | cleanroom walls | Building Insulation | duct insulation | wall finishes | pvc walls | exterior finish insulation system | stucco | decorative floor | stone finish | walkways floors | terraces floor | seamless floor | pool areas floor | patios floor | textured wall | ceramic plaster glazed | venetian finish | anti slip floors | pvc walls